What kind of layer cage is good?

Layer cages are important hardware equipment for farmers to raise laying hens. Therefore, farmers must choose the type, material, and manufacturer of layer cages when purchasing layer cages. What kind of cage is it? According to the experience of the layer cage manufacturers for many years, the egg cage manufacturer suggested that the farmers should pay attention to the following points when purchasing the chicken cage:

1. The point of view of the laying hen cage cage. The cage must be accurate when the bottom of the cage is shot. The small viewpoint cannot be rolled out of the egg in time. It may be broken by the chicken. The large point of view is simply washed down to the ground or the impulse of the egg is rolled and broken. The slope of the cage should be kept at 7-8 degrees.

2. The distance of the iron bars at the bottom of the cage. This goal of the chicken battery cages is also very important. It is usually claimed that the distance is 2.5 cm × 5 cm. It is wrong to think that the size of the broiler breeder can increase the distance. It is advocated that a chicken farm with conditions will lay a plastic net together with the cage bottom mesh at the bottom of the cage. Practice has proved that the plastic net can buffer the strength of the egg hitting the net and rolling down the bottom of the net, not only greatly reducing the egg breaking rate, but also reducing the incidence of leg disease and chest bursitis.

3. Pay attention to the connection between the chicken cage and the chicken cage. Here, the demand prompts the purchaser to pay attention to the treatment of the connection between the chicken cage and the chicken cage. It must be done finely. There should be no large open space, because there are more eggs falling here. If you are not paying attention to checking this detail when purchasing chicken cages, then we advocate that you use plastic cable ties, thin wires or thin ropes for criss-crossing, and that you can add wooden or iron baffles at the ends of the house. To prevent rolling on the ground.
4. Selection of raw materials for chicken cages. The selection of the manufacturing data of the chicken cage is very elegant. The egg cage manufacturer recommends that the material with suitable tolerance should be selected. The diameter of the cage wire is the smallest at 2 mm, and the larger the diameter of the wire, the simpler the broken egg is.